上冻体彩排列三设奖
山西省福利彩票走图
山西省福利彩票走图
山西省福利彩票走图
| Modell | H6 | H 7 | H10 | H 12 | H 13 | H 16 | H 22S | H 22T | H 32S | H 32T |
| Travels | ||||||||||
| X-Axis (mm) | 550 | 750 | 1.020 | 1.350 | 900 | 1.600 | 2.200 | 3.200 | ||
| Y-Axis (mm) | 600 | 700 | 950 | 1.300 | 1.600 | 2.200 | 1.600 | 2.200 | ||
| Z-Axis (mm) | 350 | 500 | 600 | 700 | 800 | |||||
| Table | ||||||||||
| Table working surface W x D (mm) | 600 x 600 | 810 x 620 | 1.050 x 700 | 1.500 x 960 | 900 x 1.400 | 1.900 x 1.300 | 2.400 x 1.600 | 2.400 x 2.100 | 3.320 x 1.600 | 3.320 x 2.100 |
| Load max. (uniform distribution) (kg) | 500 | 800 | 2.500 | 3.500 | 6.000 | 8.000 | 8.500 | |||
| Distance from spindle nose to table (mm) | 120 - 470 | 150 - 650 | 180 - 680 | 200 - 800 | 160 - 860 | 150 - 950 | ||||
| Distance between columns (mm) | 680 | 850 | 1.080 | 1.060 | 1.500 | 1.750 | 2.350 | 1.750 | 2.350 | |
| T-Slots (DIN 650) | 6 x 14 x 100 | 5 x 18 x 125 | 6 x 18 x 125 | 6 x 22 x 160 | 5 x 22 x 160 | 8 x 22 x 160 | 8 x 22 x 200 | 10 x 22 x 200 | 8 x 22 x 200 | 10 x 22 x 200 |
| Spindle | ||||||||||
| Spindle Taper | HSK40-E | HSK63-A / SK40 - BigPlus / BBT40 | HSK63-A / SK40 - BigPlus / SK50 - BigPlus / BBT40 / BBT50 | |||||||
| Type | Motorspindel | In-Line | ||||||||
| Power S1/S6 (kW) | 12 / 15 | 10 / 14 | ||||||||
| Torque S1/S6 (Nm) | 11 / 13,8 | 63,7 / 89,4 | ||||||||
| Spindle Speed (rpm) | 36.000 | 15.000 | ||||||||
| Feed Rate | ||||||||||
| Rapid Traverse X/Y/Z-Axis (m/min) | 30 / 30 / 30 | 32 / 32 / 32 | 30 / 30 / 30 | 20 / 20 / 20 | 20 / 16 / 20 | 16 / 20 / 20 | 16 / 16 / 20 | |||
| Cutting Feed Rate X/Y/Z-Axis (mm/min) | 12 | 20 | 12 | |||||||
| ATC & Magazine | ||||||||||
| ATC Type | Pick-up | Doppelgreifer | ||||||||
| Magazine Capacity | 20 | 24 | 30 | |||||||
| Maximum Tool Diameter (mm) full / next pocket empty | 75 | |||||||||
| With Empty Pockets (mm) | 100 | 120 | ||||||||
| Maximum Tool Length (mm) | 200 | 300 | ||||||||
| Maximum Tool Weight (kg) | 1,5 | 7 | ||||||||
| Space & System Requirements | ||||||||||
| Maximum Floor Spade (mm) W x L x H | 4.120 x 3.220 x 2.660 | 3.530 x 4.220 x 2.760 | 4.520 x 4.290 x 2.830 | 4.169 x 5.330 x 3.500 | 4.650 x 4.640 x 3.940 | 4.710 x 5.210 x 3.980 | 4.830 x 6.740 x 3.752 | 5.800 x 6.740 x 3.790 | 4.870 x 9.850 x 3.950 | 5.250 x 10.070 x 3.950 |
| Machine Net Weight (kg) | 5.500 | 7.000 | 9.100 | 13.000 | 18.000 | 20.000 | 27.000 | 31.000 | 33.000 | 37.000 |
| Electrical Power Consumption (kVA / A) | 30 / 50 | 50 / 72 | 60 / 87 | 75 / 160 | ||||||
| Air Requirements (bar) | 6 | |||||||||
| Modell | H6 | H 7 | H10 | H 12 | H 13 | H 16 | H 22S | H 22T | H 32S | H 32T |
山西省福利彩票走图
| Standard | Optional | ||
|---|---|---|---|
| H6: Heidenhain Control TNC 620 | Manual pluse generator (MPG) | ||
| H7 / H10: Heidenhain iTNC 640 Control | Rotary table (4th/5th axis) | ||
| Spindle thermal compensation system | Linear Scales | ||
| Chip flushing | Touch probe for tool measurement | ||
| Spindle cooling | Part probe measurement system | ||
| Full enclosure | Oil mist device | ||
| Programmable airblow machining | Oil mist collector | ||
| Oil mist device | Scraper type conveyor | ||
| Wash down gun and air gun | Producation package Knoll | ||
| Chip conveyor and cart | Bypass Filter | ||
| 24T arm type ATC (H7) | Rotoclear | ||
| H7/ H10: Ethernet interface | H6: Built-in spindle HSK40-E2 mit 42.000 rpm | ||
| H7/ H10: 15,000 rpm, CAT/BT40, inline spindle | H7 / H10: Ballscrew cooling system | ||
| H7 / H10: Coolant through spindle (CTS 30bar) | H7 / H10: Ballscrew cooling system |
山西省福利彩票走图
山哥竞彩
- Our Takumi Machining Centres are equipped with the latest Heidenhein TNC control 640.
山哥竞彩
- With the H-series, Takumi offers the optimal spindle for your demands
- Spindle speeds from 10.000 to 36.000 rpm
- Output up to 14kW – 40kW
- Interface: SK40/50 BigPlus – HSK-E40/A63
山哥竞彩
- The load-bearing mechanical structures such as bed, pillar, bed sledge are made of heat-treated and stress-released Meehanite cast iron.
- The thereby gained absorption capacity enables low-vibration machining processes. This ensures high surface quality on the workpiece and increases the tool life.
山哥竞彩
- In order to increase the durability of wear parts, Takumi pursues the philosophy of generating geometric accuracy from mechanics.
- The greatest effort is put into assembling the machine, for example, contact surfaces are hand scraped. Components are aligned to each other with the highest precision and assembled with the utmost care.
- Subsequent compensation via the machine control is thus reduced to a necessary minimum.
山哥竞彩
- In order to be able to offer you a perfect tool for your high-precision production, the following measures have been consistently implemented in the H-series:
- Core-cooled and pre-tensioned ball-screws
- Thermal compensation of the spindle expansion including sensors
- Jacket-cooled milling spindle
- Linear scales
山哥竞彩
- Quality components from well-known manufacturers guarantee durability and achieve the desired results:
- Oversized high-precision roller linear guides in all 3 axes
- Pre-tensionedball screws to absorb thermal deformation and maintain maximum accuracy
- 6 or more guide blocks per axis generate a balanced performance between dynamics and accuracy
山哥竞彩
- Moving mechanical elements are inherently stiff and reduced in mass.
- The high-precision roller linear guides ensure a quick response when accelerating and decelerating, resulting in high dynamics. Due to the large contact surfaces, they also ensure optimal load distribution on the guideways. The load capacity and torsional stiffness of the individual axes are increased to a maximum.This reduces the wear on the guides and also compensates vibrations during high cutting forces.
- The optimal number and positioning of the guide blocks reinforces the rigidity and ensures constant accuracy during long-term operation.
山哥竞彩
- The loading accesses of the Takumi H-machines are designed extremely generous. Both loading large components by crane and short set up times for smaller components run smoothly based on the interference-free design.
.jpg)
山哥竞彩
- Centralized maintenance units and easy-to-use work and operator interfaces generate a smooth set-up and production process.
.jpg)
山哥竞彩
- Measures such as:
- specifically positioned coolant flushing systems, steeply inclined inner walls, hinge or optional scraper belt conveyors, wide-open drop holes, tempered screw-conveyors effectively and reliably remove the volume and heat of the chips from the machining area.
山哥竞彩
- The oil skimmer prevents the emulsion quality from tipping over, even when the temperature is high or fluctuates strongly . The life of the coolant is effectively increased.
山哥竞彩
Takumi has been a successful partner of industry and research for over 30 years
Product development close to customer and market requirements H- series designed for the die & mold making
Service, sales and customer support through the proven HURCO network (PLC supported)
Service, sales and customer support through the proven HURCO network (PLC supported)
Longevity thanks to oversized supporting elements and the selection of high-quality components
Accuracy due to torsion-resistant portal construction and targeted measures for temperature resistance
Process reliability at long-term-machining with finish results on the surface that require no manual rework
The right machine model for every component size
